95 sample latency with 002r

From the Digidesign Answerbase: 95 sample latency when recording into Pro Tools via Digi 002R. Tracks are actually placed 95 samples late. Digi 002R record latency compensation is incorrect This is a known issue with Pro Tools LE and the Digi 002. ID:29152 Created:01/31/2005 I understand from other sources that 95 samples is about 2 miliseconds. Have any 002r users experienced audio recording anomalies because of this, or is it unnoticeable to you? I ask as I've not yet had delivery of my 002r.

If everything is recorded 95 samples late..... Then it should all be 95 samples late when you play it back. Shouldn't be a latency problem. Now if you are monitoring from PT and dubing a track there are issues there. You can test this latency by patching a signal analog out and then back in to record on a different track. It should be about 50 to 90 samples late. Depends on the interface. My ADAT take about 90 samples at 44.1 /24. I use 6.4. I also tested this on 6.7 on a 002R same latency. Would be nice if PT compensated for this.

Typical Answerbase - no version number is mentioned. I'd guess Digidesign support isn't staffed by people with experience in the real software world. If/when this bug is fixed, the Answerbase entry will probably continue to mislead people for years. 2ms is a very small delay, roughly equivalent to listening to speakers at a 2 foot distance. But if the error is always 95 samples, the actual time in milliseconds will depend on the sample frequency.